1. Login to your account.
  2. Click on the Events icon on the left bar.
  3. Select the dashcam you would like to view.
  4. Click the Settings icon located to the right of the dashcam.
  5. A dialog box will be open with the events settings:
    1. Choose the vehicle type (Private / Van / Trailers).
    2. Click the On/Off button to enable or disable each event (activated events buttons are highlighted in red).
    3. Configure the E-mail addresses for sending the event notification.  
  6. Click the UPDATE button at the bottom of the dialog box to save your changes. 




Available events

  1. Button Pressed: The event is triggered when the driver presses the silver button on the dashcam.
  2. De-Acceleration: The event is triggered when there is a sudden drop in the vehicle's speed (such as sudden brake).
  3. Acceleration: The event is triggered when there is a sudden increase in the vehicle's speed.
  4. Violent Left Turn: The event is triggered when there is a violent turn to the left.
  5. Violent Right Turn: The event is triggered when there is a violent turn to the right.
  6. Speed limit: The event is triggered when the vehicle meets the defined speed of this event.
  7. Vibration: The event is triggered when the car gets hit while it is in stand-by state (Sleep mode).
       Notes:
    1. The dashcam will start monitoring vibration events only 5 minutes after it switches to stand-by state (Sleep mode).
    2. A vibration event includes 10 seconds of front camera's video taken from the time the event has been triggered.
    3. A trigger situation will be ignored if the vehicle will switch out of stand-by state (change to ignition ON) within 10 seconds. 
    4. Only installations that supports stand-by state (Sleep mode) will be able to generate this event.